Menene amfanin PID zazzabi module na scr ikon regulator

Masu sarrafa wutaana amfani da su sosai a cikin aikace-aikacen dumama na lantarki, wanda zai iya rage girgiza na yanzu zuwa mai zafi da kuma samar da ingantaccen kulawar zafin jiki.Based a kan shekaru masu yawa na ƙwarewa a cikin.mai kula da wutar lantarkihaɓakawa da aikace-aikacen, kamfaninmu ya haɓaka amai kula da wutar lantarkitare da ginanniyar tsarin kula da zafin jiki na PID.Wannan samfurin ana iya amfani dashi ko'ina a cikin aikace-aikacen juriya da inductive, kayan aikin sarrafa dumama lantarki ne.

Tare dathyristor ikon sarrafawaginanniyar tsarin sarrafa zafin jiki na PID, ba kwa buƙatar ƙara ƙarin mitar sarrafa zafin jiki don canjin zafin jiki, adana kuɗin saka hannun jari.A lokaci guda, bayan ginanniyar tsarin kula da zafin jiki na PID, ƙirar samfurin ya fi ƙayyadaddun ƙayyadaddun samfuran kuma yana haɓaka kyawun samfurin.Haɗa siginar firikwensin PT100, K, S, B, E, R, N kai tsaye zuwa cikinmai sarrafa wutar lantarki 

Thescr ikon regulatorzai gano siginar kuma canja wurin zuwa 4-20mA / 0-5v / 0-10v zuwa matsayin sarrafawar fitarwa.

Ka'idar kula da zafin jiki na PID: ƙimar bayanin zafin da aka gano yana canzawa zuwa siginar lantarki, kuma ana cire siginar lantarki daga ƙimar sarrafa saiti bayan daidaitawar PID kuma an sami ƙimar karkacewa.Ana samun ƙimar ƙetare ta hanyar tsarin lissafin kuma an shigar da adadin sarrafawa a cikin mai kunnawa.Mai kunnawa yana daidaita ma'auni masu dacewa na da'irar wutar lantarki bisa ga umarnin, gane ikon sarrafa nauyin wutar lantarki, kuma a ƙarshe ya cimma burin sarrafa zafin jiki.

Nokel Electric kwararre nemai kula da wutar lantarkizane da kuma samar da kamfanin.Dangane da shekaru 20 na ƙwarewar ci gaban dandamali na SCR, ya haɓaka babban aiki sosaimai sarrafa wutar lantarki, Za'a iya daidaitawa zuwa ƙarfin lantarki 220--1140v, 25--2000A juriya da nauyin haɓakawa, ya sami sakamako mai kyau a cikin masana'antar dumama lantarki.Samfuran Noker Electric suna da alaƙa da:

1. Gina-in high yi, ƙananan ikon microcontroller;
2. Siffofin gefe;
2.1.Taimakawa 4-20mA da 0-5V / 10v biyu da aka ba;
2.2.Abubuwan shigarwa guda biyu masu canzawa;
2.3.Faɗin wutar lantarki na madauki na farko (AC110--440V);
3. Ingantacciyar hanyar kwantar da hankali, irin wannan ƙananan girman, nauyi mai nauyi;
4. Ayyukan ƙararrawa na aiki;

4.1.Rashin gazawar lokaci;
4.2.Yawan zafi;
4.3 Yawanci;
4.4.Rage kaya;
5. Fitowar fitarwa ɗaya, 3A AC250V, 3A DC30V;
6. Don sauƙaƙe sadarwar RS485 mai sarrafawa ta tsakiya;
7. Fitowar analog na zaɓi, mai sarrafa zafin jiki na PID.

Idan kuna da wata tambaya, da fatan za a tuntuɓe mu, za mu ba ku mafita.