125a 3Φ3W Scr Mai Gudanar da Wutar Lantarki Don Ƙarfafawar Masana'antu da Ƙarfafa Hoto

125a 3Φ3W Scr Mai Kula da Wutar Lantarki Don Ƙarfafawar Masana'antu da Ƙarfafawa

Takaitaccen Bayani:

NK30T jerin thyristor ikon sarrafawa rungumi dabi'ar sabuwar ikon lantarki iko fasahar, thermal kwaikwaiyo fasaha, tare da babban iko daidaici, kananan size da sauran halaye.

Ana amfani da mai sarrafa wutar lantarki na Thyristor a cikin dumama lantarki, layin samar da gilashin iyo, silicon monocrystalline, dumama polysilicon, gyare-gyaren kayan ƙarfe da sauran lokuta, abokan cinikinmu sun yaba sosai.

Aika mana imel

Cikakken Bayani

Tags samfurin

Bidiyo

Siffofin

Ana amfani da mai sarrafa wutar lantarki na Scr, wanda kuma aka sani da mai sarrafa wutar lantarki don sarrafa isar da wutar lantarki.An ƙirƙira su don bambanta ƙarfin wutar lantarki a tsakanin kayan juriya&inductive.Masu kula da wutar lantarki na thyristor suna ba da hanyar isar da wuta mai santsi don ɗauka.Ba kamar na'urorin lantarki ba, ba su da masu motsi na lantarki.Mai sarrafa wutar lantarki na Scr ya haɗa da baya zuwa baya haɗe mai gyara silicon (scr), allon pcb mai jawo, masu taswira na yanzu, mai canza yanayin zafi.Ta hanyar allon pcb mai jawo don sarrafa thyristor ta kusurwar lokaci& giciye sifili ya fashe samfura biyu.Masu taswira na yanzu suna gano yanayin halin yanzu na lokaci uku, a matsayin sarrafawar yau da kullun kuma don zama kariya ta yanzu.Masu canjin zafin jiki suna gano zafin zafi don kare Scr don zama lafiya.

1. Gina-in high yi, ƙananan ikon microcontroller;
2. Siffofin gefe;
2.1.Taimakawa 4-20mA da 0-5V / 10v biyu da aka ba;
2.2.Abubuwan shigarwa guda biyu masu canzawa;
2.3.Faɗin wutar lantarki na madauki na farko (AC110--440V);
3. Ingantacciyar hanyar kwantar da hankali, irin wannan ƙananan girman, nauyi mai nauyi;
4. Ayyukan ƙararrawa na aiki;

4.1.Rashin gazawar lokaci;
4.2.Yawan zafi;
4.3 Yawanci;
4.4.Rage kaya;
5. Fitowar fitarwa ɗaya, 3A AC250V, 3A DC30V;
6. Don sauƙaƙe sadarwar RS485 mai sarrafawa ta tsakiya;

Ƙayyadaddun bayanai

Abu	Ƙayyadaddun bayanai
Tushen wutan lantarki	Babban iko: AC260--440v, ikon sarrafawa: AC160-240v
Mitar wutar lantarki	45-65Hz
Ƙididdigar halin yanzu	25 a---320a
Hanya mai sanyaya	An tilasta fan sanyaya
Kariya	Asarar lokaci, akan halin yanzu, akan zafi, wuce gona da iri, asarar kaya
Shigarwar analog	Shigarwar analog guda biyu, 0-10v/4-20ma/0-20ma
Shigarwar dijital	Shigarwar dijital biyu
fitarwa fitarwa	Fitowar relay guda ɗaya
Sadarwa	Modbus sadarwa
Yanayin tayar da hankali	Matsakaicin motsi na lokaci, jan hankali-sifili
Daidaito	± 1%
Kwanciyar hankali	± 0.2%
Yanayin Muhalli	Kasa da 2000m.Haɓaka ƙarfin ƙimar lokacin da tsayin ya wuce 2000m.Zazzabi na yanayi: -25+45°CHumidity na yanayi: 95%(20°C±5°C) Jijjiga <0.5G

Tasha

Mai sarrafa wutar lantarki na Scr tare da wadataccen wutar lantarki ya tashi daga 110-440v, tallafin 0-10v/4-20mA shigarwar analog, shigarwar dijital 2, ana iya amfani da sadarwar modbus don sarrafa mai sarrafa ikon scr daga nesa.Idan kuna buƙata tare da tsarin zafin jiki na PID, zaɓi ne.Ba kwa buƙatar ƙara ƙarin yanayin zafin jiki kuma.

Aikin allo

Mai sarrafa wutar lantarki na thyristor scr kashi uku yana ɗaukar nunin bututu na dijital na 4-bit, hasken nunin bututun dijital mai ɗaukar ido yana da girma, ingantaccen aminci.Zai iya nuna duk sigogi da matsayi na mai sarrafa wutar lantarki, bayanin kuskure.Ƙirar ɗan adam ya dace sosai don saitin bayanan filin mai sarrafa wuta da nunin matsayi.

Girma

The harsashi na thyristor scr ikon regulator an yi shi da babban ingancin sanyi birgima karfe farantin, da surface ana bi da anti-oxidation, da foda ana bi da tare da electrostatic spraying, wanda yana da halaye na high zafin jiki juriya da kuma anti-oxidation.Mai sarrafa wutar lantarki yana da ƙayyadaddun ƙirar tsari, ƙaramin ƙara da nauyi mai sauƙi.

Aikace-aikace

noker=thyristor_power-controller_pcb_board

Thyristor mai sarrafa wutar lantarki ana amfani da shi sosai tare da juriya da kayan aiki.Wasu aikace-aikacen scr ikon sarrafa wutar lantarki ana amfani da su sosai:

1. Aluminum narkewa tanderu;

2. Rike tanderu;

3. Tufafi;

4. Microwave bushewa;

5. Multi-zone bushewa da warkewa overs;

6. Filastik allura gyare-gyaren bukatar Multi-zone dumama ga mainfold molds;

7. Filastik bututu da zanen gado extrusion;

8. Ƙarfe zanen gado tsarin walda;

Sabis na abokin ciniki

1. Ana ba da sabis na ODM/OEM.

2. Tabbatarwa da sauri.

3. Lokacin bayarwa da sauri.

4. Lokacin biyan kuɗi mai dacewa.

A halin yanzu, kamfanin yana faɗaɗa kasuwannin ketare da ƙaƙƙarfan tsarin duniya.Mun himmatu wajen zama daya daga cikin manyan kamfanoni goma na fitar da kayayyaki zuwa kasashen waje da ke samar da wutar lantarki ta kasar Sin, da yin hidima ga duniya da kayayyaki masu inganci da kuma samun nasarar cimma nasara tare da karin abokan ciniki.